types of lifts
Various types of lifts, based on their mode of operation, such as hydraulically powered lifts. Various lift operation schemes and configurations.
Lift technicians set lifts into a prepared framed hoist-way. They install support assembly, set up the lift pump or motor, piston or cable, and mechanism. Lift technicians connect the necessary electronic elements to complete the installation and connection of the lift cabin. They also perform the necessary steps to inspect and repair lifts, as well as the shaft and any associated electronics. Lift technicians make sure every inspection and report action is noted in a log book, and report to the client on the state of the serviced lift.
Competences and skills
58 ESCO relationsEssential knowledge 9 competences
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
1 competenceCross-sector
8 competenceselectrical wiring plans
Pictorial representation of an electrical circuit. It shows the components of the circuit as simplified shapes, and the power and signal connections between the devices. It gives information about the relative position and arrangement of devices and terminals on the devices, to help in building or servicing the device. A wiring diagram is often used to troubleshoot problems and to make sure that all the connections have been made and that everything is present.
electricity
The principles of electricity and electrical power circuits, as well as the associated risks.
hydraulics
The power transmission systems that use the force of flowing liquids to transmit power.
lift safety legislation
Local legislation on lift safety mechanisms, loading limits, speed limits and installation procedures.
lift safety mechanisms
The various mechanisms to prevent a lift from falling. Lift governor operation and safety brake operation mechanisms.
mechanical systems
Mechanical systems, including gears, engines, hydraulic and pneumatic systems. Their functions and likely defects.
mechanics
Theoretical and practical applications of the science studying the action of displacements and forces on physical bodies to the development of machinery and mechanical devices.
pneumatics
The application of pressurised gas to produce mechanical motion.
Essential skills and competences 22 competences
Occupation specific
1 competenceprovide escalator maintenance
Ensure a quick and efficient response to maintain and repair escalators within a building, as requested by the client.
Sector-specific
1 competenceguide lift car installation
Guide the process where a crane hoists the lift car to the top of the finished shaft and lowers it along the support rails. Communicate with the crane operator during the car installation to ensure correct and safe installation.
Cross-sector
20 competencesconduct routine machinery checks
Check machinery and equipment to ensure reliable performance during use and operations in worksites.
consult technical resources
Read and interpret technical resources such as digital or paper drawings and adjustment data in order to properly set up a machine or working tool, or to assemble mechanical equipment.
follow health and safety procedures in construction
Apply the relevant health and safety procedures in construction in order to prevent accidents, pollution and other risks.
green
inspect construction supplies
Check construction supplies for damage, moisture, loss or other problems before using the material.
install electrical and electronic equipment
Install equipment which is dependent on electric currents or electromagnetic fields in order to work, or equipment to generate, transfer or measure such currents and fields. This equipment includes switchboards, electric motors, generators or direct current systems.
install hydraulic systems
Install systems and components that use liquid fluid power to create mechanical movements such as hydraulic pumps, valves, hydraulic motors, hydraulic cylinders and other elements that power hydraulic machinery.
install lift controller
Install the lift controller, which processes and transmits lift control signals to the motor, in the machine room at the top of the shaft. Connect it to the hoist motor, a source of electricity, and the control input signal wires.
install lift governor
Install the lift governor, which controls the movement speed and braking mechanisms of the lift, in the machine room at the top of the shaft. Calibrate the governor and link it up with the motor, control mechanism, and a source of electricity.
install lift shaft support equipment
Securely install the necessary equipment to guide the movement of a lift in the shaft, and to facilitate maintenance. Attach rails to the sides of the shaft to guide the movement of the car. Install service ladders for maintenance and emergency purposes.
install pneumatic systems
Install systems and components that use pneumatics to create mechanical movements such as air brakes, pneumatic cylinders, air compressors and other systems.
operate soldering equipment
Use soldering equipment to melt and join together pieces of metal or steel, such as a soldering gun, soldering torch, gas-powered iron, and others.
perform maintenance on installed equipment
Perform the maintenance on installed equipment on-site. Follow procedures to avoid uninstalling equipment from machinery or vehicles.
program lift controller
Configure the lift controller to make sure the lift operates correctly and efficiently. Set the desired operating mode for one lift or for lift group operation.
record test data
Record data which has been identified specifically during preceding tests in order to verify that outputs of the test produce specific results or to review the reaction of the subject under exceptional or unusual input.
resolve equipment malfunctions
Identify, report and repair equipment damage and malfunctions. Communicate with field representatives and manufacturers to obtain repair and replacement components.
secure working area
Secure the operation site fixing boundaries, restricting access, placing signs and taking other measures in order to guarantee public and staff safety.
test lift operation
Test all features of a lift to ensure proper and efficient functioning.
troubleshoot
Identify operating problems, decide what to do about it and report accordingly.
use safety equipment in construction
Use elements of protective clothing such as steel-tipped shoes, and gear such as protective goggles, in order to minimise risk of accidents in construction and to mitigate any injury if an accident does occur.
work ergonomically
Apply ergonomy principles in the organisation of the workplace while manually handling equipment and materials.
Optional knowledge 1 competence
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
0 competencesNo competences in this bucket.
Cross-sector
1 competenceelectronics
The functioning of electronic circuit boards, processors, chips, and computer hardware and software, including programming and applications.
digital
Optional skills and competences 26 competences
Occupation specific
3 competencesassist people trapped in confined spaces
Assist people stuck in limited spaces such as lifts or amusement park attractions, explain the situation in a calm manner, give instructions as to the proper reaction and rescue them.
calculate gear ratio
Determine the ratio of the rotational speed of interlocking gears which can be calculated from the number of teeth on the drive and driven gears.
refurbish facilities
Renovate and modernise buildings and equipment which can include technical or decorative improvements such as replace lighting, install new flooring, refresh paint and other modifications.
Sector-specific
9 competencesestimate restoration costs
Estimate the cost implications of restoring and replacing products or parts.
guide operation of heavy construction equipment
Guide a colleague in operating a piece of heavy construction equipment. Follow the operation closely and understand when feedback is called for. Use communication techniques like voice, two-way radio, agreed-upon gestures and whistles to signal the appropriate information to the operator.
issue sales invoices
Prepare the invoice of goods sold or services provided, containing individual prices, the total charge, and the terms. Complete order processing for orders received via telephone, fax and internet and calculate the customer’s final bill.
maintain facility security systems
Ensure that proper and functional security systems are in place, including alarm systems, fire alarms, sprinklers and emergency exits.
monitor lift shaft construction
Monitor the construction of the lift shaft in a building. Make sure the shaft is straight and structurally sound to support safe operation of a lift.
process incoming construction supplies
Receive incoming construction supplies, handle the transaction and enter the supplies into any internal administration system.
provide customer information related to repairs
Inform customers about necessary repairs or replacements, discuss products, services and costs, include accurate technical information.
work in a construction team
Work as part of a team in a construction project. Communicate efficiently, sharing information with team members and reporting to supervisors. Follow instructions and adapt to changes in a flexible manner.
write records for repairs
Write records of the repairs and maintenance interventions undertaken, of parts and materials used, and other repair facts.
Cross-sector
14 competencesadvise on safety improvements
Provide relevant recommendations following the conclusion of an investigation; ensure that recommendations are duly considered and where appropriate acted upon.
apply technical communication skills
Explain technical details to non-technical customers, stakeholders, or any other interested parties in a clear and concise manner.
attach lift motor cables
Install the electric motor which will hoist the lift up and down in the machine room at the top of the shaft. Securely attach the lift hoist and governor cables to the lift car, its pulleys and the installed motor.
calculate needs for construction supplies
Take measurements on site and estimate the amount of materials required for the construction or restoration project.
follow safety procedures when working at heights
Take necessary precautions and follow a set of measures that assess, prevent and tackle risks when working at a high distance from the ground. Prevent endangering people working under these structures and avoid falls from ladders, mobile scaffolding, fixed working bridges, single person lifts etc. since they may cause fatalities or major injuries.
keep personal administration
File and organise personal administration documents comprehensively.
keep records of work progress
Maintain records of the progress of the work including time, defects, malfunctions, etc.
operate welding equipment
Use welding equipment to melt and join together pieces of metal or steel, wearing protective eyewear during the working process.
order supplies
Command products from relevant suppliers to get convenient and profitable products to purchase.
perform ICT troubleshooting
Identify problems with servers, desktops, printers, networks, and remote access, and perform actions which solve the problems.
digital
perform risk analysis
Identify and assess factors that may jeopardise the success of a project or threaten the organisation's functioning. Implement procedures to avoid or minimise their impact.
prepare compliance documents
Prepare documents with legal value which prove that an installation or a facility is conform to the regulations.
replace defect components
Remove defective parts and replace them with functioning components.
green
rig loads
Safely attach loads to different types of hooks and attachments, taking into account the weight of the load, the power available to move it, static and dynamic tolerances of all instruments and materials, and the mass distribution of the system. Communicate with the operator verbally or with gestures to ensure the safety and efficiency of the operation. Detach loads.