diving vessels systems
The characteristics, functioning and way of working with dynamic positioning systems, construction barges and dive support vessels.
Underwater construction supervisors monitor underwater construction projects such as tunnels, canal locks and bridge pillars. They guide and instruct construction commercial divers and make sure they adhere to safety regulations.
Competences and skills
58 ESCO relationsEssential knowledge 4 competences
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
1 competenceCross-sector
3 competencesdiving equipment
Equipment used for a dive, including wetsuits and drysuits, helmets, scuba equipment and any umbilical equipment which provides the connection with the surface.
diving operation requirements
The operational plan and the contingency plan for the diving operation, the diving equipment to be used in the diving operation, the diving signals to be used in the diving operation, the in-water decompression procedures to be used in the diving operation, and any emergency procedures that might have to be used in the diving operation.
quality assurance procedures
The procedures to inspect a product or system to ensure that it is according to specifications and requirements.
Essential skills and competences 24 competences
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
9 competencescheck diving equipment
Check diving equipment for valid certification to ensure its suitability. Ensure that any diving equipment is examined by a competent person before use, at least once on each day on which it is to be used. Ensure that it is adequately tested and repaired.
comply with the planned time for the depth of the dive
Ensure that a diver returns from a given depth after the planned time limit has expired.
ensure diving operations conform with plan
Ensure that the dive adheres to the operational plan and the contingency plan.
ensure health and safety of dive teams
Monitor the safety of the dive teams. Ensure that the operation is carried out from a safe, suitable location as per diving operation manual. When necessary, decide whether it is safe to proceed with the dive.
implement dive plans
Implement dive plans, working with the client, vessel teams and marine superintendents.
inspect construction sites
Ensure health and safety during the construction project by inspecting the construction site regularly. Identify risks of putting people in danger or of damaging construction equipment.
interrupt diving operations when necessary
Terminate or interrupt the diving operation if you judge that continuing the operation is likely to endanger the health or safety of any person involved.
process incoming construction supplies
Receive incoming construction supplies, handle the transaction and enter the supplies into any internal administration system.
work in a construction team
Work as part of a team in a construction project. Communicate efficiently, sharing information with team members and reporting to supervisors. Follow instructions and adapt to changes in a flexible manner.
Cross-sector
15 competencescomply with legal requirements for diving operations
Ensure that diving operations comply with legal requirements, such as age, health and swimming abilities.
coordinate construction activities
Coordinate the activities of several construction workers or crews to make sure they do not interfere with each other and to ensure that the works are done in a timely manner. Keep up to date on the progress of the teams and update the schedule if called for.
ensure compliance with construction project deadline
Plan, schedule and monitor the building processes in order to ensure completion of the project by the set deadline.
ensure equipment availability
Ensure that the necessary equipment is provided, ready and available for use before start of procedures.
evaluate employees work
Evaluate the need for labour for the work ahead. Evaluate the performance of the team of workers and inform superiors. Encourage and support the employees in learning, teach them techniques and check the application to ensure product quality and labour productivity.
follow health and safety procedures in construction
Apply the relevant health and safety procedures in construction in order to prevent accidents, pollution and other risks.
green
inspect construction supplies
Check construction supplies for damage, moisture, loss or other problems before using the material.
keep records of work progress
Maintain records of the progress of the work including time, defects, malfunctions, etc.
manage health and safety standards
Oversee all personnel and processes to comply with health, safety and hygiene standards. Communicate and support alignment of these requirements with the company's health and safety programmes.
plan resource allocation
Plan future needs of various resources such as time, money and specific process resources.
prevent damage to utility infrastructure
Consult utility companies or plans on the location of any utility infrastructure that may interfere with a project or be damaged by it. Take the necessary steps to avoid damage.
react to events in time-critical environments
Monitor the situation around you and anticipate. Be ready to take quick and appropriate action in case of unexpected events.
secure working area
Secure the operation site fixing boundaries, restricting access, placing signs and taking other measures in order to guarantee public and staff safety.
supervise staff
Oversee the selection, training, performance and motivation of staff.
use safety equipment in construction
Use elements of protective clothing such as steel-tipped shoes, and gear such as protective goggles, in order to minimise risk of accidents in construction and to mitigate any injury if an accident does occur.
Optional knowledge 4 competences
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
3 competencesbridge engineering
Thoroughly understand principles and characteristics of bridge management, bridge deck loading, bridge durability, steel and composite bridge design, long span bridges, etc.
construction product regulation
Regulations on construction products quality standards applied throughout the European Union.
cost management
The process of planning, monitoring and adjusting the expenses and revenues of a business in order to achieve cost efficiency and capability.
Cross-sector
1 competencemachinery load capacity
The maximum load capacity of the operated piece of machinery, under different circumstances and in different positions and movements. Passive load capacity and active load capacity, which is measure while in motion.
Optional skills and competences 26 competences
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
12 competencesconstruct canal locks
Install lock systems in sections of canals for the raising and lowering of vessels from one level to another. These are used for their passage over canals as well as for the control of the water level.
construct dams
Dewater a suitable area through the construction of a diversion tunnel and use earthmoving equipment to build a coffer dam. Remove rocks and rubble in order to construct a plant, which uses concrete to prevent water leakages by using waterstops.
display warnings around dive site
Ensure that warning devices are displayed in the area around a dive site, so as to keep it clear of any equipment other than that associated with the diving operation.
dive with scuba equipment
Use scuba equipment to dive without air supply from the surface.
inspect concrete structures
Visually inspect a concrete structure to see if it is structurally sound. Check for different types of cracks, such as those due to reinforcement corrosion, impact damage or high water content.
inspect pipelines
Walk flow lines to identify damage or leaks; use electronic detection equipment and conduct visual inspections.
manage bridge construction projects
Inspect, assess and approve technical procedures; apply maintenance strategies, systems and procedures; assess the load testing of bridges; devise new methods of strengthening; and ensure the suitable design of bridges taking into consideration issues such as durability, maintenance requirements etc.
monitor stock level
Evaluate how much stock is used and determine what should be ordered.
perform underwater bridge inspection
Wade through a body of water to inspect the piles of a bridge. Put on the appropriate equipment, such as weights, and make sure to have an associate present for safety reasons.
position anchor poles
Lower and raise the anchor poles, or spuds, of a dredge vessel. Determine the desired position of the spuds and release them. Hoist the spuds back up to change the position of the ship.
position dredger
Communicate with the captain or mate to move the dredge into the right position to commence the dredging operation.
transport construction supplies
Bring construction materials, tools and equipment to the construction site and store them properly taking various aspects into account such as the workers' safety and protection from deterioration.
Cross-sector
14 competencescalculate needs for construction supplies
Take measurements on site and estimate the amount of materials required for the construction or restoration project.
critique the dive with the dive team
Assess the dive with the dive team upon completion. Instruct the diver(s) so as to improve procedures and routines for future dives.
inspect offshore constructions
Conduct regular inspections during and after the construction of offshore facilities such as oil platforms to ensure risk minimisation and compliance with regulations.
green
maintain diving equipment
Perform maintenance actions, including small repairs, on diving equipment.
measure water depth
Measure the depths of a body of water by using depth measuring equipment such as a depth gauge.
order construction supplies
Order required materials for the construction project, taking care to purchase the most suitable material for a good price.
perform diving interventions
Perform hyperbaric interventions at a maximum pressure of 4 atmospheres. Prepare and review the personal equipment and the auxiliary material. Perform and supervise the dive. Realise maintenance of the diving equipment and auxiliary material. Apply security measures to ensure the divers' safety when realising deep immersions.
provide first aid
Administer cardiopulmonary resuscitation or first aid in order to provide help to a sick or injured person until they receive more complete medical treatment.
provide technical expertise
Provide expert knowledge in a particular field, especially concerning mechanical or scientific subjects, to decision makers, engineers, technical staff or journalists.
recognise signs of corrosion
Recognise the symptoms of metal showing oxidation reactions with the environment resulting in rusting, copper pitting, stress cracking, and others, and estimate the rate of corrosion.
recruit employees
Hire new employees by scoping the job role, advertising, performing interviews and selecting staff in line with company policy and legislation.
- Scope note
- It may include recruiting volunteers.
report defective manufacturing materials
Maintain required company records and forms in order to report any defective materials or questionable conditions of manufacturing machinery and equipment.
rig loads
Safely attach loads to different types of hooks and attachments, taking into account the weight of the load, the power available to move it, static and dynamic tolerances of all instruments and materials, and the mass distribution of the system. Communicate with the operator verbally or with gestures to ensure the safety and efficiency of the operation. Detach loads.
train employees
Lead and guide employees through a process in which they are taught the necessary skills for the perspective job. Organise activities aimed at introducing the work and systems or improving the performance of individuals and groups in organisational settings.