domestic cooling systems
The modern and traditional cooling systems such as air conditioning, ventilation, or radiant cooling, and their energy saving principles.
ESCO occupation
Back to ESCO occupations
Heating, ventilation, air conditioning and refrigeration engineering technicians aid in the design of devices which provide heating, ventilation, air conditioning and possibly refrigeration in buildings. They ensure the equipment complies with environmental standards. They handle hazardous materials used in the systems, and ensure safety precautions are in place.
Competences and skills
40 ESCO relationsEssential knowledge 8 competences
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
4 competenceselectric heating systems
Electric heating systems contribute to indoor comfort and energy saving under the right conditions (low frequency use, or very highly insulated buildings). They include InfraRed and electric floor/wall heating.
green
mechanical engineering
Discipline that applies principles of physics, engineering and materials science to design, analyse, manufacture and maintain mechanical systems.
types of heat pumps
Various types of heat pumps, used to produce heating, cooling and potable hot water making use of an energy source with low temperature and bringing it to a higher temperature.
green
Cross-sector
4 competencesheating, ventilation, air conditioning and refrigeration parts
The different parts constituing heating, air conditioning and refrigeration systems such as the different valves, fans, compressors, condensers, filters and other components.
hydraulics
The power transmission systems that use the force of flowing liquids to transmit power.
refrigerants
The characteristics and properties of the different fluids used in heat pump and refrigeration cycles.
thermodynamics
The branch of physics that deals with the relationships between heat and other forms of energy.
Essential skills and competences 10 competences
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
3 competencesinterpret 2D plans
Interpret and understand plans and drawings in manufacturing processes which include representations in two dimensions.
monitor utility equipment
Monitor equipment which provides utility services such as power, heat, refrigeration, and steam, in order to ensure they are functional, operate according to regulations, and to check for faults.
operate climate control
Operate climate control installations.
Cross-sector
7 competencesapply health and safety standards
Adhere to standards of hygiene and safety established by respective authorities.
conduct routine machinery checks
Check machinery and equipment to ensure reliable performance during use and operations in worksites.
ensure compliance with environmental legislation
Monitor activities and perform tasks ensuring compliance with standards involving environmental protection and sustainability, and amend activities in the case of changes in environmental legislation. Ensure that the processes are compliant with environment regulations and best practices.
green
handle refrigerant transfer pumps
Handle the different transfer pumps used to keep a refrigerant in the liquid phase at the right pressure for an optimal accuracy and speed of the charging station.
interpret 3D plans
Interpret and understand plans and drawings in manufacturing processes which include representations in three dimensions.
maintain records of maintenance interventions
Keep written records of all repairs and maintenance interventions undertaken, including information on the parts and materials used, etc.
use testing equipment
Use equipment to test performance and operation of machinery.
Optional knowledge 2 competences
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
2 competencesbiogas energy
Energy production for heating and potable hot water making use of biogas (the biogas is generated off-site), and its contribution to energy performance.
green
district heating and cooling
District heating and cooling exploits local sustainable sources of energy to provide heating and potable hot water to a group of buildings and contributes to improve the energy performance.
green
Cross-sector
0 competencesNo competences in this bucket.
Optional skills and competences 20 competences
Occupation specific
4 competencesinstall firestops
Attach fire resistant collars or material to pipes and ducts to prevent the spread of fire and smoke through wall or ceiling openings.
install refrigeration equipment
Install refrigeration, air condition or heat pump equipment, connect components and piping, attach equipment to the electrical network and secondary sources of heat transfer if required.
perform refrigerant leak checks
Perform refrigerant leak checks of refrigeration, air condition or heat pump equipment to make sure there are no leaks of refrigerant from the system using both direct and indirect method.
test tightness and pressure of refrigeration circuits
Perform system pressure tests on refrigeration, air condition or heat pump equipment using pressurised gas and vacuum pump to check tightness of the refrigeration circuit and its parts.
green
Sector-specific
4 competencesadvise on fitted ventilation systems
Investigate and advise on a ventilation system that fits the energy demands but also guarantees good indoor air quality according to minimum indoor air quality levels. Consider alternative ways of ventilation (e.g., stack ventilation, use of chimney effect, natural ventilation).
green
arrange equipment repairs
Arrange for equipment repairs when necessary.
drain hazardous liquids
Drain substances which pose health and safety risks from equipment, appliances or installations in order to store the liquids according to safety guidelines and dispose or treat them as required.
green
provide power connection from bus bars
Provide power connection from copper or metal busbars.
Cross-sector
12 competencesexamine engineering principles
Analyse the principles that need to be considered for engineering designs and projects such as functionality, replicability, costs and other principles.
install air conditioning device
Install air conditioning devices, which remove heat, and often moisture, from the air through a variety of mechanisms. Create the necessary openings through walls and floors and place the device. Connect it to a power supply. Configure the device.
install electrical and electronic equipment
Install equipment which is dependent on electric currents or electromagnetic fields in order to work, or equipment to generate, transfer or measure such currents and fields. This equipment includes switchboards, electric motors, generators or direct current systems.
install heating boiler
Place heating, ventilation, air conditioning and refrigeration boilers, which heats up water and circulates it through a closed radiator system to distribute heat around a structure. Connect the boiler to a source of fuel or electricity and to the circulation system. Connect it to the water supply if it features an automatic filling system. Configure the boiler.
install heating furnace
Place a furnace which heats air to be distributed around a structure. Connect the furnace to a source of fuel or electricity and connect any air ducts to guide the heated air. Configure the furnace.
install heating, ventilation, air conditioning and refrigeration ducts
Install ducts to deliver and remove air. Determine whether the duct should be flexible or not, and select the appropriate material based on projected usage. Waterproof and airproof the duct and insulate it against temperature influence to ensure maximum efficiency and prevent contamination with mould. Make the correct connections between the ducts and endpoints.
install ventilation equipment
Install equipment to enable the ventilation of a structure. Mount fans and install air inlets and outlets. Install ducts to permit the transfer of air. Configure the ventilation system if it is electronically controlled.
lay pipe installation
Install the system of pipes used to transport a fluid, be it a liquid or a gas, from one point to another and connect it to the fuel and water supply lines, air ducts, and other components.
lead a team
Lead, supervise and motivate a group of people, in order to meet the expected results within a given timeline and with the foreseen resources in mind.
perform maintenance on installed equipment
Perform the maintenance on installed equipment on-site. Follow procedures to avoid uninstalling equipment from machinery or vehicles.
resolve equipment malfunctions
Identify, report and repair equipment damage and malfunctions. Communicate with field representatives and manufacturers to obtain repair and replacement components.
use personal protection equipment
Make use of protection equipment according to training, instruction and manuals. Inspect the equipment and use it consistently.