types of moulded fibres
Field of information which distinguishes different kinds of moulded fibres such as thickwall, transfer moulded, thermoformed, and processed fibre types.
Paper pulp moulding operators tend a machine that moulds paper pulp in various shapes, usually for use in lightweight but sturdy packaging material, such as egg boxes.
Competences and skills
36 ESCO relationsEssential knowledge 3 competences
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
2 competencestypes of pulp
Kinds of pulp are distinguished based on their fibre type and the specific chemical processes through which they were created.
Cross-sector
1 competencequality standards
The national and international requirements, specifications and guidelines to ensure that products, services and processes are of good quality and fit for purpose.
Essential skills and competences 12 competences
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
3 competencesmaintain moulds
Maintain, repair and clean moulds and mould parts, e.g. by smoothening out imperfections on the surface. Use water, grease or oil to wash and scrape the moulds by hand.
monitor pulp quality
Ensure quality of recycled papers and pulp, reviewing stickies, plastics, colour, unbleached fibres, brightness, and dirt.
operate pulp moulding machine
Shape paperboard flats by using formation moulds, which vacuum pulp and windsoft the excess material. Transfer the materials to a conveyor belt. Apply waterproof lubricants so the flats won't stick to the mould and put the flats in an oven, after which the rigid material is stacked and made ready to be packaged.
Cross-sector
9 competencesmonitor automated machines
Continuously check up on the automated machine's set-up and execution or make regular control rounds. If necessary, record and interpret data on the operating conditions of installations and equipment in order to identify abnormalities.
digital
monitor conveyor belt
Monitor the flow of the work pieces on the conveyor belt as they are processed by the machine to ensure optimal productivity.
perform test run
Perform tests putting a system, machine, tool or other equipment through a series of actions under actual operating conditions in order to assess its reliability and suitability to realise its tasks, and adjust settings accordingly.
set up the controller of a machine
Set up and give commands to a machine by dispatching the appropriate data and input into the (computer) controller corresponding with the desired processed product.
digital
supply machine
Ensure the machine is fed the necessary and adequate materials and control the placement or automatic feed and retrieval of work pieces in the machines or machine tools on the production line.
troubleshoot
Identify operating problems, decide what to do about it and report accordingly.
use moulding techniques
Use moulding techniques, such as rotational moulding, injection moulding, blow moulding, compression moulding, extrusion moulding and thermo-forming to shape liquid raw materials, such as plastic, ceramic, glass and metal.
wear appropriate protective gear
Wear relevant and necessary protective gear, such as protective goggles or other eye protection, hard hats, safety gloves.
work safely with machines
Check and safely operate machines and equipment required for your work according to manuals and instructions.
- Scope note
- Includes more generally used small electrical and mechanical tools like drills, manual sawing machines, washing machines, sewing machines, etc. that are also used in non professional environment.
Optional knowledge 1 competence
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
1 competencedeinking processes
Various deinking processes such as flotation, bleaching, and washing. These are used to remove ink from the paper in preparation for producing new paper.
Cross-sector
0 competencesNo competences in this bucket.
Optional skills and competences 20 competences
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
6 competencesconcentrate pulp slurry
Measure the weight and concentration of the pulp slurry for further processing and storage by using disk filters and calculating slurry density with specific formulas.
feed pulp mixing vat
Open valve to admit water into pulp-mixing vat. Weigh and dump specified amounts of different ingredients such as scrap paper, rosin, wax and other binders into the vat. Transfer the mixed slurry to a storage or slurry tank.
grade pulp
Oversee pulp quality based on their pulping process, raw materials, yield, fibre length and other categories such as dirt, moisture content, porosity, density, and brightness.
operate pulper
Set up and monitor the blender that crushes wastepaper and dry pulp sheets and mixes them with water to produce slurry for the production of paper and paper-related products.
prepare wood production reports
Prepare reports on wood technology production and progressive development of wood based materials.
test paper production samples
Acquire test samples at various stages of the paper deinking and paper recycling process. Process the samples, e.g. by adding a measured amount of dye solution, and test them to determine values such as the pH level, the tear resistance or the degree of disintegration.
green
Cross-sector
14 competencesadjust curing ovens
Adjust the temperature of the curing ovens by turning dials so that it is set to the correct parameters.
consult technical resources
Read and interpret technical resources such as digital or paper drawings and adjustment data in order to properly set up a machine or working tool, or to assemble mechanical equipment.
coordinate shipments of recycling materials
Coordinate and oversee shipments of recycling materials. Communicate with processing companies and shipping brokers.
green
dispose of non-hazardous waste
Dispose of waste materials which pose no risk to health and safety in a manner which complies with recycling and waste management procedures except for waste incineration.
green
extract products from moulds
Remove finished products from moulds and examine them in detail for anomalies.
inspect quality of products
Use various techniques to ensure the product quality is respecting the quality standards and specifications. Oversee defects, packaging and sendbacks of products to different production departments.
keep records of work progress
Maintain records of the progress of the work including time, defects, malfunctions, etc.
maintain recycling records
Maintain records and process facts and figures about type and volume of different recycling operations.
green
monitor gauge
Oversee the data presented by a gauge concerning the measurement of pressure, temperature, thickness of a material, and others.
perform machine maintenance
Perform regular maintenance, possibly including corrections and alterations, on a machine or machine tool to ensure it remains in a proper productive state.
record production data for quality control
Keep records of the machine's faults, interventions and irregularities for quality control.
report defective manufacturing materials
Maintain required company records and forms in order to report any defective materials or questionable conditions of manufacturing machinery and equipment.
select mould types
Select the appropriate type and size of mould based on the operation.
tend packaging machines
Tend packaging machines such as filling, labelling, and sealing machines. Stock and sort products to be processed according to specifications. Replenish packaging supplies as required, such as boxes, cartons, wrapping paper, plastic sheet, glue, ink, or labels.