cut house wrap
Make incisions in house wrap to insert windows, doors or other objects. Plan the incision first and mark the lines on the wrap. Remove excess material. Tape all seams.
Window installers place windows into structures and service them. They take out old windows if present, prepare the opening, mount the window, and attach it in place plumb, straight, square and watertight.
Competences and skills
40 ESCO relationsEssential skills and competences 15 competences
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
5 competencescut insulation material to size
Cut insulation material to fit snugly into a space if that space is too small, too large, or of an irregular shape.
install sill pan
Install different types of sill pans, systems that sit underneath the window sill to collect any excess moisture or fluids and convey it outside as to prevent moisture damage to the window or adjacent structures.
transport construction supplies
Bring construction materials, tools and equipment to the construction site and store them properly taking various aspects into account such as the workers' safety and protection from deterioration.
use shims
Set shims in gaps to keep objects firmly in place. Use the suitable size and type of shim, depending on the purpose.
Cross-sector
10 competencesapply insulation strips
Apply insulation strips, which prevent air exchange between outdoors and indoors areas.
green
apply proofing membranes
Apply specialised membranes to prevent penetration of a structure by dampness or water. Securely seal any perforation to preserve the damp-proof or waterproof properties of the membrane. Make sure any membranes overlap top over bottom to prevent water from seeping in. Check the compatibility of multiple membranes used together.
apply spray foam insulation
Spray foam insulation, usually polyurethane, to fill a space.
follow health and safety procedures in construction
Apply the relevant health and safety procedures in construction in order to prevent accidents, pollution and other risks.
green
inspect construction supplies
Check construction supplies for damage, moisture, loss or other problems before using the material.
manipulate glass
Manipulate the properties, shape and size of glass.
set window
Place a window in a prepared position such as a wall or floor, in case of full height glass. Use measurement tools to ascertain that the window is straight and plumb.
use measurement instruments
Use different measurement instruments depending on the property to be measured. Utilise various instruments to measure length, area, volume, speed, energy, force, and others.
use safety equipment in construction
Use elements of protective clothing such as steel-tipped shoes, and gear such as protective goggles, in order to minimise risk of accidents in construction and to mitigate any injury if an accident does occur.
work ergonomically
Apply ergonomy principles in the organisation of the workplace while manually handling equipment and materials.
Optional knowledge 2 competences
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
0 competencesNo competences in this bucket.
Cross-sector
2 competencesenergy performance of buildings
Factors that contribute to lower energy consumption of buildings. Building and renovation techniques used to achieve this. Legislation and procedures regarding energy performance of buildings.
green
types of insulation material
Various types of insulation material and their usage cases, advantages, risks and costs.
green
Optional skills and competences 23 competences
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
10 competencesapply house wrap
Cover exterior surfaces with house wrap to prevent moisture from entering a structure, while allowing it to exit. Securely fasten the wrap with staples, often button staples. Tape seams.
create architectural sketches
Create architectural sketches for the design and detail specifications of interiors and exteriors to scale.
install construction profiles
Install a variety of metal or plastic profiles used to attach materials to each other or to structural elements. Cut them to size if called for.
install frameless glass
Set frameless glass panes, usually in showers and on bathtubs. Use plastic shims to make sure the glass doesn't touch any hard surfaces, which may cause scratching or breaking. Make sure the glass is level and attach any brackets to keep the glass in place. Waterproof the edges with silicone rubber caulk.
interpret 2D plans
Interpret and understand plans and drawings in manufacturing processes which include representations in two dimensions.
monitor stock level
Evaluate how much stock is used and determine what should be ordered.
process incoming construction supplies
Receive incoming construction supplies, handle the transaction and enter the supplies into any internal administration system.
use sander
Use different types of drywall sanders, automatic or manual, handheld or on an extension, to sand surfaces to a smooth finish or to rough them up for better adhesion.
use squaring pole
Use a squaring pole, a telescopic measurement pole that allows for checking the length of the diagonals of an inset area of a structure. If the diagonals are of equal length, the inset is straight.
work in a construction team
Work as part of a team in a construction project. Communicate efficiently, sharing information with team members and reporting to supervisors. Follow instructions and adapt to changes in a flexible manner.
Cross-sector
13 competencesadvise on construction materials
Provide advice on and test a wide range of construction materials.
- Scope note
- It includes building stone, sand, bricks, clay and gravel.
assemble insulating glazing units
Assemble two glass panes with a spacer, usually made of stainless steel, aluminium or structural foam, and apply an adhesive sealant to press the glass panes against the spacer. Drill holes in the spacer to draw out the air, fill the space with gas or leave the vacuum, then seal the holes.
assemble windows
Assemble the profiles to build window or glass door frames using cutting, trimming, sealing and welding equipment,fix the metal fittings with power tools, and insert the glass pane.
follow safety procedures when working at heights
Take necessary precautions and follow a set of measures that assess, prevent and tackle risks when working at a high distance from the ground. Prevent endangering people working under these structures and avoid falls from ladders, mobile scaffolding, fixed working bridges, single person lifts etc. since they may cause fatalities or major injuries.
inspect insulation
Inspect the quality of the insulation of a structure. Inspect the insulation visually to detect any mistakes or defects. Analyse infrared imagery to see any cold bridges, air gaps, or insulation malfunctions.
inspect quality of products
Use various techniques to ensure the product quality is respecting the quality standards and specifications. Oversee defects, packaging and sendbacks of products to different production departments.
install insulation material
Place insulation material, often shaped into rolls, in order to insulate a structure from thermical or acoustic influences and to prevent fire. Attach the material using face staples, inset staples, or rely on friction to keep the material in place.
interpret 3D plans
Interpret and understand plans and drawings in manufacturing processes which include representations in three dimensions.
keep personal administration
File and organise personal administration documents comprehensively.
keep records of work progress
Maintain records of the progress of the work including time, defects, malfunctions, etc.
maintain work area cleanliness
Keep the working area and equipment clean and orderly.
order construction supplies
Order required materials for the construction project, taking care to purchase the most suitable material for a good price.
pack fragile items for transportation
Pack fragile items such as glass panes or glass objects using the appropriate boxes and cushioning materials such as air-encapsulated plastic or customised foam enclosures to make sure the content will not move during transportation.