asphalt mixes
The properties, advantages and disadvantages of asphalt mixes such as Marshall and Superpave mixes and the way they are best applied.
Asphalt plant operators extract raw materials such as sand and stones and operate mobile equipment for their transport to the plant. They tend automated machines to crush and sort out stones, and to mix the sand and stones with asphalt cement. They take samples to check the quality of the mix and arrange for its transport to the construction site.
Competences and skills
38 ESCO relationsEssential knowledge 3 competences
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
0 competencesNo competences in this bucket.
Cross-sector
3 competencescomposite materials
The properties of different materials developped in a laboratory, their usage per type of products, and how to create them.
types of asphalt coverings
Different types of asphalt covering, based on their bitumen content and composition. The strengths, weaknesses, and price points of each type. Special properties such as porosity, resistance to skidding and noise characteristics.
Essential skills and competences 12 competences
Occupation specific
1 competencetend asphalt mixing machine
Tend the machines which mix asphalt solution feeding it with the already processed minerals, bitumen and additives according to the formula.
Sector-specific
4 competencesoperate raw mineral separation equipment
Operate a variety of machinery used to separate raw mineral for further processing based on size of particles or chemical composition. Work with screens, flotation cells, spirals, jigs, drums and cyclones.
operate raw mineral size reduction equipment
Operate equipment used to reduce the size of raw minerals to prepare it for further processing. Work with gyrotary and jaw crushers, and roll, ball and autogenous mills.
segregate raw materials
Segregate into batches the raw materials to be further processed.
weigh materials
Weigh materials and products, record weight and other relevant data on tags or labels.
Cross-sector
7 competencescontrol temperature
Measure and adjust temperature of a given space or object.
feed raw material into plant machinery
Insert raw materials, chemicals and processing agents into plant machinery.
monitor automated machines
Continuously check up on the automated machine's set-up and execution or make regular control rounds. If necessary, record and interpret data on the operating conditions of installations and equipment in order to identify abnormalities.
digital
prepare raw materials
Prepare and measure the basic materials that are needed to produce goods and finished products.
record production data for quality control
Keep records of the machine's faults, interventions and irregularities for quality control.
set up the controller of a machine
Set up and give commands to a machine by dispatching the appropriate data and input into the (computer) controller corresponding with the desired processed product.
digital
supply machine
Ensure the machine is fed the necessary and adequate materials and control the placement or automatic feed and retrieval of work pieces in the machines or machine tools on the production line.
Optional knowledge 3 competences
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
1 competenceexcavation techniques
The methods to remove rock and soil, used in an excavation site and the associated risks.
Cross-sector
2 competencesconstruction industry
The products, brands and suppliers active in the construction field.
material mechanics
The behaviour of solid objects when subjected to stresses and strains, and the methods to calculate these stresses and strains.
Optional skills and competences 20 competences
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
5 competenceshandle delivery of raw materials
Receive raw materials from the suppliers. Check their quality and accuracy and move them into the warehouse. Make sure that raw materials are adequately stored until they are required by the production department.
maintain mixer truck
Maintain the cement mixing truck by greasing the rollers and checking the oil and antifreeze levels.
monitor stock level
Evaluate how much stock is used and determine what should be ordered.
operate heat treatment furnace
Operate or tend furnaces such as gas, oil, electric to heat treat castings in order to reach the correct mechanical properties. Adjust furnace controls to heat parts the prescribed time to the right temperature.
transport construction supplies
Bring construction materials, tools and equipment to the construction site and store them properly taking various aspects into account such as the workers' safety and protection from deterioration.
Cross-sector
15 competencesclean equipment
Perform cleaning routines after equipment use.
collect samples for analysis
Collect samples of materials or products for laboratory analysis.
- Scope note
- Follow the procedures required for the collection of materials and products for laboratory analysis.
drive mobile heavy construction equipment
Drive movable heavy equipment used in construction. Load the equipment onto low loaders, or unload it. Judiciously drive equipment on public roads when required.
ensure compliance with environmental legislation
Monitor activities and perform tasks ensuring compliance with standards involving environmental protection and sustainability, and amend activities in the case of changes in environmental legislation. Ensure that the processes are compliant with environment regulations and best practices.
green
keep records of work progress
Maintain records of the progress of the work including time, defects, malfunctions, etc.
load bulk trucks
Conduct activities associated with determining the itineraries and loading of bulk trucks.
operate concrete mixer truck
Work with concrete mixer trucks. Drive the truck and operate controls. Keep track of time. Take the necessary steps to evacuate the concrete upon arrival at the site, either alone using a full range chute, or with help when using a rear chute.
perform machine maintenance
Perform regular maintenance, possibly including corrections and alterations, on a machine or machine tool to ensure it remains in a proper productive state.
perform product testing
Test processed workpieces or products for basic faults.
record test data
Record data which has been identified specifically during preceding tests in order to verify that outputs of the test produce specific results or to review the reaction of the subject under exceptional or unusual input.
report defective manufacturing materials
Maintain required company records and forms in order to report any defective materials or questionable conditions of manufacturing machinery and equipment.
stack goods
Stack goods and manufactured products into containers. This may include anticipating the need for and utilising additional protective materials in stacking the products.
tend packaging machines
Tend packaging machines such as filling, labelling, and sealing machines. Stock and sort products to be processed according to specifications. Replenish packaging supplies as required, such as boxes, cartons, wrapping paper, plastic sheet, glue, ink, or labels.
work ergonomically
Apply ergonomy principles in the organisation of the workplace while manually handling equipment and materials.
write batch record documentation
Write reports on the manufactured batches history taking into account the raw data, tests performed and compliance to Good Manufacturing Practices (GMP) of each batch of product.