control engineering
Subdiscipline of engineering that focuses on controlling the behaviour of systems through the use of sensors and actuators.
digital
Instrumentation engineering technicians assist instrumentation engineers in the development of control equipment, such as valves, relays, and regulators, which can be used to monitor and control processes. Instrumentation engineering technicians are responsible for building, testing, monitoring, and maintaining of equipment. They use wrenches, beam cutters, grind saws, and overhead cranes to build and repair equipment.
Competences and skills
78 ESCO relationsEssential knowledge 6 competences
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
0 competencesNo competences in this bucket.
Cross-sector
6 competenceselectromechanics
The engineering processes that combine electrical and mechanical engineering in the application of electromechanics in devices that need electricity to create mechanical movement or devices that create electricity by mechanical movement.
electronics
The functioning of electronic circuit boards, processors, chips, and computer hardware and software, including programming and applications.
digital
instrumentation engineering
The science and engineering discipline that attempts to control process variables of production and manufacturing. It also focuses on the design of systems with desired behaviours. These systems use sensors to measure the output performance of the device that is being controlled.
digital
instrumentation equipment
The equipment and instruments used for the monitoring and controlling of processes, such as valves, regulators, circuit breakers, and relays.
metallurgy
The branch of science concerned with the study of the chemical and physical properties of metallic elements, intermetallic elements, and alloys.
Essential skills and competences 26 competences
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
4 competencesassemble measuring equipment
Assemble and fit together the different components of the measuring equipment, such as circuit boards, control units, sensors, transmitters, and cameras, to create precision instruments that are able to measure, transmit, indicate, record, and control.
measure parts of manufactured products
Operate measurement instruments to measure parts of manufactured objects. Take into consideration specifications of manufacturers to perform the measuring.
test instrumentation equipment
Check the instrumentation equipment for accuracy and performance using pneumatic, electronic, and electrical test and measuring equipment and hand tools.
use wrenches
Use spanners to adjust machinery and equipment.
Cross-sector
22 competencesadjust engineering designs
Adjust designs of products or parts of products so that they meet requirements.
align components
Align and lay out components in order to put them together correctly according to blueprints and technical plans.
assemble instrumentation equipment
Build systems and instruments which measure, control, and monitor processes. Fit the instrument parts such as power supplies, control units, lenses, springs, circuit boards, sensors, transmitters, and controllers.
assist scientific research
Assist engineers or scientists with conducting experiments, performing analysis, developing new products or processes, constructing theory, and quality control.
conduct routine machinery checks
Check machinery and equipment to ensure reliable performance during use and operations in worksites.
develop instrumentation systems
Develop control equipment, such as valves, relays, and regulators, which can be used to monitor and control processes. Test the developed equipment.
ensure conformity to specifications
Ensure that the assembled products are conform to the specifications given.
fasten components
Fasten components together according to blueprints and technical plans in order to create subassemblies or finished products.
inspect quality of products
Use various techniques to ensure the product quality is respecting the quality standards and specifications. Oversee defects, packaging and sendbacks of products to different production departments.
liaise with engineers
Collaborate with engineers to ensure common understanding and discuss product design, development and improvement.
manage instrumentation systems
Set up, adjust, operate and maintain instrumentation systems. Process and analyse data, and present research results.
measure electrical characteristics
Measure voltage, current, resistance or other electrical characteristics by using electrical measuring equipment such as multimeters, voltmeters, and ammeters.
operate soldering equipment
Use soldering equipment to melt and join together pieces of metal or steel, such as a soldering gun, soldering torch, gas-powered iron, and others.
perform test run
Perform tests putting a system, machine, tool or other equipment through a series of actions under actual operating conditions in order to assess its reliability and suitability to realise its tasks, and adjust settings accordingly.
prepare production prototypes
Prepare early models or prototypes in order to test concepts and replicability possibilities. Create prototypes to assess for pre-production tests.
read assembly drawings
Read and interpret drawings listing all the parts and subassemblies of a certain product. The drawing identifies the different components and materials and provides instructions on how to assemble a product.
read engineering drawings
Read the technical drawings of a product made by the engineer in order to suggest improvements, make models of the product or operate it.
read standard blueprints
Read and comprehend standard blueprints, machine, and process drawings.
record test data
Record data which has been identified specifically during preceding tests in order to verify that outputs of the test produce specific results or to review the reaction of the subject under exceptional or unusual input.
use hand tools
Utilize tools that are powered by hand, such as screwdrivers, hammers, pliers, drills and knives to manipulate materials and help create and assemble various products.
use power tools
Operate power driven pumps. Use hand tools or power tools. Use vehicle repair tools or safety equipment.
wear appropriate protective gear
Wear relevant and necessary protective gear, such as protective goggles or other eye protection, hard hats, safety gloves.
Optional knowledge 24 competences
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
7 competencescloud technologies
The technologies which enable access to hardware, software, data and services through remote servers and software networks irrespective of their location and architecture.
digital
data mining
The methods of artificial intelligence, machine learning, statistics and databases used to extract content from a dataset.
digital
data storage
The physical and technical concepts of how digital data storage is organised in specific schemes both locally, such as hard-drives and random-access memories (RAM) and remotely, via network, internet or cloud.
digital
mechanical engineering
Discipline that applies principles of physics, engineering and materials science to design, analyse, manufacture and maintain mechanical systems.
offshore constructions and facilities
Structures and facilities installed in a marine environment, usually for the production and transmission of electricity, oil, gas and other resources.
green
offshore renewable energy technologies
The different technologies used to implement the marine renewable energy to an increasing degree, such as wind, wave and tidal turbines, floating photovoltaics, hydrocratic generators and ocean thermal energy conversion (OTEC).
green
power plant instrumentation
The equipment and instruments used for the monitoring and controlling processes in power plants. This requires proper operation, calibration, and regular maintenance.
Cross-sector
17 competencesautomation technology
Set of technologies that make a process, system, or apparatus operate automatically through the use of control systems.
digital
CAD software
The computer-aided design (CAD) software for creating, modifying, analysing or optimising a design.
digital
- Scope note
- CAD software should be differentiated from computer-aided design and drafting (CADD) software. CADD systems are CAD systems with additional drafting features. For example, CADD systems enable an engineer or architect to insert size annotations and other notes into a design.
CAE software
The software to perform computer-aided engineering (CAE) analysis tasks such as Finite Element Analysis and Computional Fluid Dynamics.
digital
electrical engineering
The field of engineering that deals with the study and application of electricity, electronics, and electromagnetism.
electrical equipment regulations
The national and international regulations with regards to the use and manufacture of electrical equipment on the workfloor. These regulations provide rules and guidelines on topics such as general risk management, electrical equipment manufacture, electrical equipment testing, electrical equipment installation, warning labels, and certificates.
electronic equipment standards
The national and international quality and safety standards and regulations with regards to the use and manufacture of electronic equipment and its components, such as semiconductors and printed circuit boards.
firmware
Firmware is a software program with a read-only memory (ROM) and a set of instructions that is permanently inscribed on a hardware device. Firmware is commonly used in electronic systems such as computers, mobile phones, and digital cameras.
digital
hydraulics
The power transmission systems that use the force of flowing liquids to transmit power.
instrument performance elements
Elements that indicate or influence instrument performance. A first indication of the performance of the instrument is the accuracy or precision of the instrument, such as its response time, resolution, and range. A second indication of performance is the technical performance of the instrument, such as its power level, the electromagnetic interference, and transient voltages. A third indication of performance are environmental factors that can influence instrument performance, such as humidity, operating temperatures, or dust.
marine technology
Technologies for the safe use, exploitation, protection of, and intervention in the marine environment.
green
mechatronics
Multidisciplinary field of engineering that combines principles of electrical engineering, telecommunications engineering, control engineering, computer engineering, and mechanical engineering in the design of products and manufacturing processes. The combination of these areas of engineering allows for the design and development of "smart" devices and the achievement of an optimal balance between mechanical structure and control.
nuclear energy
The generation of electrical energy through the use of nuclear reactors, by converting the energy released from nuclei of atoms in reactors which generate heat. This heat subsequently generates steam which can power a steam turbine to generate electricity.
pneumatics
The application of pressurised gas to produce mechanical motion.
quality standards
The national and international requirements, specifications and guidelines to ensure that products, services and processes are of good quality and fit for purpose.
renewable energy
The different types of energy sources which cannot be depleted, such as wind, solar, water, biomass, and biofuel energy. The different technologies used to implement these types of energy to an increasing degree, such as wind turbines, hydroelectric dams, photovoltaics, and concentrated solar power.
green
sensors
Sensors are transducers that can detect or sense characteristics in their environment. They detect changes in the apparatus or environment and provide a corresponding optical or electrical signal. Sensors are commonly divided in six classes: mechanical, electronic, thermal, magnetic, electrochemical, and optical sensors.
digital
statistical analysis system software
Specific software system (SAS) used for advanced analytics, business intelligence, data management, and predictive analytics.
digital
- Scope note
- This includes SPSS
Optional skills and competences 22 competences
Occupation specific
1 competenceoperate circular saw
Use circular saws or beam cutters to cut through wood or metal.
Sector-specific
1 competenceutilise machine learning
Use techniques and algorithms that are able to extract mastery out of data, learn from it and make predictions, to be used for program optimisation, application adaptation, pattern recognition, filtering, search engines and computer vision.
digital
Cross-sector
20 competencesanalyse big data
Collect and evaluate numerical data in large quantities, especially for the purpose of identifying patterns between the data.
digital
apply soldering techniques
Apply and work with a variety of techniques in the process of soldering, such as soft soldering, silver soldering, induction soldering, resistance soldering, pipe soldering, mechanical and aluminium soldering.
apply technical communication skills
Explain technical details to non-technical customers, stakeholders, or any other interested parties in a clear and concise manner.
calibrate electronic instruments
Correct and adjust the reliability of an electronic instrument by measuring output and comparing results with the data of a reference device or a set of standardised results. This is done in regular intervals which are set by the manufacturer and using calibration devices.
conduct quality control analysis
Conduct inspections and tests of services, processes, or products to evaluate quality.
integrate new products in manufacturing
Assist with the integration of new systems, products, methods, and components in the production line. Ensure that production workers are properly trained and follow the new requirements.
keep records of work progress
Maintain records of the progress of the work including time, defects, malfunctions, etc.
maintain sensor equipment
Diagnose and detect malfunctions in sensor components, systems, and products using sensors and remove, replace, or repair these components when necessary. Execute preventative equipment maintenance tasks, such as storing the components in clean, dust-free, and non-humid spaces.
digital
operate cranes
Operate cranes to move, position, lift or place machinery, equipment or other large objects at various locations.
operate precision machinery
Operate machinery used for the making of small systems or components with a high level of precision.
program firmware
Program permanent software with a read-only memory (ROM) on a hardware device, such as an integrated circuit.
digital
replace defect components
Remove defective parts and replace them with functioning components.
green
resolve equipment malfunctions
Identify, report and repair equipment damage and malfunctions. Communicate with field representatives and manufacturers to obtain repair and replacement components.
tend metal sawing machine
Tend sawing machine designed for metal cutting processes, monitor and operate it, according to regulations.
tend surface grinding machine
Tend a metalworking machine designed to smoothen a metal surface by applying grinding, abrasive machine processes, monitor and operate it according to regulations.
test sensors
Test sensors using appropriate equipment. Gather and analyse data. Monitor and evaluate system performance and take action if needed.
digital
use CAM software
Use computer-aided manufacturing (CAM) programmes to control machinery and machine tools in the creation, modification, analysis, or optimisation as part of the manufacturing processes of workpieces.
digital
use precision tools
Use electronic, mechanical, electric, or optical precision tools, such as drilling machines, grinders, gear cutters and milling machines to boost accuracy while machining products.
use remote control equipment
Use a remote control to operate equipment. Watch the equipment closely while operating, and use any sensors or cameras to guide your actions.
digital
write technical reports
Compose technical customer reports understandable for people without technical background.