types of tile adhesive
Different adhesive materials for different types of tile, surfaces, drying times, environmental conditions and costs.
Tiling supervisors monitor tile fitting operations. They assign tasks and take quick decisions to resolve problems.
Competences and skills
50 ESCO relationsEssential knowledge 1 competence
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
1 competenceCross-sector
0 competencesNo competences in this bucket.
Essential skills and competences 23 competences
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
7 competencescheck compatibility of materials
Make sure the materials are fit to be used together, and if there are any foreseeable interferences.
interpret 2D plans
Interpret and understand plans and drawings in manufacturing processes which include representations in two dimensions.
monitor stock level
Evaluate how much stock is used and determine what should be ordered.
plan surface slope
Make sure the planned surface has the necessary slope to prevent puddling of water or fluids.
plan tiling
Plan the position of the tiling on the surface. Mark straight and flush lines to determine the position of the tiles. Decide on the spacing between the tiles.
process incoming construction supplies
Receive incoming construction supplies, handle the transaction and enter the supplies into any internal administration system.
work in a construction team
Work as part of a team in a construction project. Communicate efficiently, sharing information with team members and reporting to supervisors. Follow instructions and adapt to changes in a flexible manner.
Cross-sector
16 competencesadvise on construction materials
Provide advice on and test a wide range of construction materials.
- Scope note
- It includes building stone, sand, bricks, clay and gravel.
answer requests for quotation
Make up prices and documents for the products that customers may purchase.
ensure compliance with construction project deadline
Plan, schedule and monitor the building processes in order to ensure completion of the project by the set deadline.
ensure equipment availability
Ensure that the necessary equipment is provided, ready and available for use before start of procedures.
evaluate employees work
Evaluate the need for labour for the work ahead. Evaluate the performance of the team of workers and inform superiors. Encourage and support the employees in learning, teach them techniques and check the application to ensure product quality and labour productivity.
follow health and safety procedures in construction
Apply the relevant health and safety procedures in construction in order to prevent accidents, pollution and other risks.
green
inspect construction supplies
Check construction supplies for damage, moisture, loss or other problems before using the material.
interpret 3D plans
Interpret and understand plans and drawings in manufacturing processes which include representations in three dimensions.
keep records of work progress
Maintain records of the progress of the work including time, defects, malfunctions, etc.
liaise with managers
Liaise with managers of other departments ensuring effective service and communication, i.e. sales, planning, purchasing, trading, distribution and technical.
manage health and safety standards
Oversee all personnel and processes to comply with health, safety and hygiene standards. Communicate and support alignment of these requirements with the company's health and safety programmes.
order construction supplies
Order required materials for the construction project, taking care to purchase the most suitable material for a good price.
plan shifts of employees
Plans shifts of employees to ensure completion of all customer orders and satisfactory completion of the production plan.
supervise staff
Oversee the selection, training, performance and motivation of staff.
types of tile
Tiles of different sizes, materials and glazing. Their properties such as weight, propensity to chipping or breaking, moisture resistance, adhesion and cost.
use safety equipment in construction
Use elements of protective clothing such as steel-tipped shoes, and gear such as protective goggles, in order to minimise risk of accidents in construction and to mitigate any injury if an accident does occur.
Optional knowledge 4 competences
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
3 competencesart history
The history of art and artists, the artistic trends throughout centuries and their contemporary evolutions.
construction product regulation
Regulations on construction products quality standards applied throughout the European Union.
cost management
The process of planning, monitoring and adjusting the expenses and revenues of a business in order to achieve cost efficiency and capability.
Cross-sector
1 competenceaesthetics
Set of principles based on which something is appealing and beautiful.
Optional skills and competences 22 competences
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
11 competencesapply tile adhesive
Apply the tile adhesive, often thinset, to the surface. Load the notch trowel with adhesive and paste it to the wall to form a thin, even layer. Take the drying time of the material and your working speed into account to make sure the adhesive does not dry out. Remove excess adhesive. Apply silicone or mastic along the edges, anywhere slight movement is expected, or for improved moisture resistance.
attach accessories to tile
Use silicone to securely attach accessories, such as soap holders, to tile. Paste silicone onto the accessory and press it firmly against the tile. Hold it in place to dry if necessary.
caulk expansion joints
Fill the space intentionally created to allow for expansion or contraction of the construction materials with a sealant such as silicone.
cut tiles
Cut tiles to the right size and shape using a wet tile saw. Set up the wet saw and attach it to a water source if called for. Mark the desired shape and size on the tile. Push the tile against the rotating carbide blade of the saw to make a straight cut. For curved cuts, make straight incisions at right angles along the desired curve. Snap off the resulting 'fingers' and finish the curve with a diamond file.
drill holes in tile
Use a special carbide tipped drill bit to cut holes in tile. Apply masking tape or another appropriate covering material to protect against chipping and to keep the drill bit from slipping. Mark the spot and nick it slightly with a punch. Apply medium pressure to the drill to prevent chipping or breaking.
fill tile joints
Use grout, silicone paste, mastic or other appropriate material to fill the joints between tiles. Spread the mixture onto the tiles using a padded trowel or float. Make sure the mixture is worked into the joints before removing excess material. Use a diagonal motion to avoid scooping material from the joints. Wash material from the front of the tiles and buff the tiles to finish.
lay tiles
Firmly place the tiles on a surface prepared with adhesive. Adjust their position to so they are flush and evenly spaced. Take care not to disturb the surface. Insert spacers in the joints. When working vertically with heavy tiles, place a supporting piece of timber to prevent slippage if called for. Remove any excess adhesive from the face of the tile.
maintain tile flooring
Remove mould and stains, assess the damage and identify the cause, remove the old adhesive to replace broken tiles, repair joints and apply new protective layers.
make mosaic
Create a mosaic by laying out individually cut pieces of suitable materials, such as glass, ceramics, or shells, in artful shapes. Work with one or several mosaic techniques, such as direct mosaic, indirect mosaic and double inverse mosaic.
mix construction grouts
Mix construction materials with water and other materials based on the appropriate recipe. Mix thoroughly to prevent lumps. Avoid contamination, which will adversely affect the properties of the mixture.
operate mosaic tools
Use the appropriate tools to cut and chip mosaic for fitting into the workpiece.
Cross-sector
11 competencescalculate needs for construction supplies
Take measurements on site and estimate the amount of materials required for the construction or restoration project.
install insulation material
Place insulation material, often shaped into rolls, in order to insulate a structure from thermical or acoustic influences and to prevent fire. Attach the material using face staples, inset staples, or rely on friction to keep the material in place.
keep personal administration
File and organise personal administration documents comprehensively.
manage contracts
Negotiate the terms, conditions, costs and other specifications of a contract while making sure they comply with legal requirements and are legally enforceable. Oversee the execution of the contract, agree on and document any changes in line with any legal limitations.
negotiate supplier arrangements
Reach an agreement with the supplier upon technical, quantity, quality, price, conditions, storage, packaging, send-back and other requirements related to the purchasing and delivering process.
provide first aid
Administer cardiopulmonary resuscitation or first aid in order to provide help to a sick or injured person until they receive more complete medical treatment.
provide technical expertise
Provide expert knowledge in a particular field, especially concerning mechanical or scientific subjects, to decision makers, engineers, technical staff or journalists.
recruit employees
Hire new employees by scoping the job role, advertising, performing interviews and selecting staff in line with company policy and legislation.
- Scope note
- It may include recruiting volunteers.
train employees
Lead and guide employees through a process in which they are taught the necessary skills for the perspective job. Organise activities aimed at introducing the work and systems or improving the performance of individuals and groups in organisational settings.
use measurement instruments
Use different measurement instruments depending on the property to be measured. Utilise various instruments to measure length, area, volume, speed, energy, force, and others.
work ergonomically
Apply ergonomy principles in the organisation of the workplace while manually handling equipment and materials.