quality standards
The national and international requirements, specifications and guidelines to ensure that products, services and processes are of good quality and fit for purpose.
Boring machine operators prepare, operate, and maintain single or multiple spindle machines using a boring bar with a hardened, rotary, multipointed cutting tool in order to enlarge an existing hole in a fabricated workpiece.
Competences and skills
47 ESCO relationsEssential knowledge 4 competences
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
0 competencesNo competences in this bucket.
Cross-sector
4 competencestypes of boring heads
Qualities and applications of various types of boring heads, such as rough boring heads, fine boring heads and others.
types of drill bits
Qualities and applications of various types of drill bits, such as core drill bits, spotting drill bits, countersink drill bits and others.
types of metal
Qualities, specifications, applications and reactions to different fabricating processes of various types of metal, such as steel, aluminium, brass, copper and others.
Essential skills and competences 12 competences
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
1 competencetend boring machine
Tend a boring machine, monitor and operate it, according to regulations.
Cross-sector
11 competencesdispose of cutting waste material
Dispose of possibly hazardous waste material created in the cutting process, such as swarf, scrap and slugs, sort according to regulations, and clean up workplace.
ensure equipment availability
Ensure that the necessary equipment is provided, ready and available for use before start of procedures.
monitor automated machines
Continuously check up on the automated machine's set-up and execution or make regular control rounds. If necessary, record and interpret data on the operating conditions of installations and equipment in order to identify abnormalities.
digital
operate precision measuring equipment
Measure the size of a processed part when checking and marking it to check if it is up to standard by use of two and three dimensional precision measuring equipment such as a caliper, a micrometer, and a measuring gauge.
perform test run
Perform tests putting a system, machine, tool or other equipment through a series of actions under actual operating conditions in order to assess its reliability and suitability to realise its tasks, and adjust settings accordingly.
remove inadequate workpieces
Evaluate which deficient processed workpieces do not meet the set-up standard and should be removed and sort the waste according to regulations.
remove processed workpiece
Remove individual workpieces after processing, from the manufacturing machine or the machine tool. In case of a conveyor belt this involves quick, continuous movement.
set up the controller of a machine
Set up and give commands to a machine by dispatching the appropriate data and input into the (computer) controller corresponding with the desired processed product.
digital
supply machine
Ensure the machine is fed the necessary and adequate materials and control the placement or automatic feed and retrieval of work pieces in the machines or machine tools on the production line.
supply machine with appropriate tools
Supply the machine with the necessary tools and items for a particular production purpose. Monitor the stock and replenish when needed.
troubleshoot
Identify operating problems, decide what to do about it and report accordingly.
Optional knowledge 19 competences
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
17 competencesferrous metal processing
Various processing methods on iron and iron-containing alloys such as steel, stainless steel and pig iron.
manufacture of small metal parts
The manufacture of metal cable, plaited bands and other articles of that type, uninsulated or insulated cable not capable of being used as a conductor of electricity, coated or cored wire as well as barbed wire, wire fencing, grill, netting, cloth etc. Manufacture of coated electrodes for electric arc-welding, nails and pins, chain and springs (except watch springs), as well as leaves for springs.
manufacturing of cutlery
The manufacture of different cutlery items, such as forks, spoons, knives, razors or scissors.
manufacturing of door furniture from metal
The manufacture of metal items that can be attached to a door in order to support its function and appearance. The manufacture of padlocks, locks, keys, hinges and the like, and hardware for buildings, furniture, vehicles etc.
manufacturing of doors from metal
The manufacture of metal doors, windows and their frames, shutters and gates, and the metal room partitions for floor attachment.
manufacturing of heating equipment
The manufacture of electrical ovens and water heaters by metalworking processes.
manufacturing of light metal packaging
The manufacture of tins and cans for food products, collapsible tubes and boxes, and of metallic closures.
manufacturing of metal assembly products
The manufacture of rivets, washers and similar non-threaded products, screw machine products, screws, nuts and similar threaded products.
manufacturing of metal containers
The manufacture of reservoirs, tanks and similar containers of metal, of types normally installed as fixtures for storage or manufacturing use. The manufacture of metal containers for compressed or liquefied gas.
manufacturing of metal household articles
The manufacture of flatware , hollowware , dinnerware and other non-electrical utensils for use at the table or in the kitchen.
manufacturing of metal structures
The production of metal structures for construction.
manufacturing of steam generators
The manufacture of steam or other vapour generators, the manufacture of auxiliary plant for use with steam generators: condensers, economisers, superheaters, steam collectors and accumulators. The manufacture of nuclear reactors, parts for marine or power boilers. Also the production of pipe system construction comprising further processing of tubes generally to make pressure pipes or pipe systems together with the associated design and construction work.
manufacturing of steel drums and similar containers
The manufacture of pails, cans, drums, buckets, boxes, through metalworking processes.
manufacturing of tools
The manufacture of knives and cutting blades for machines or for mechanical appliances, hand tools such as pliers, screwdrivers etc. The manufacture of non-power-driven agricultural hand tools, saws and saw blades, including circular saw blades and chainsaw blades. The manufacture of interchangeable tools for hand tools, whether or not power-operated, or for machine tools: drills, punches, milling cutters etc. The manufacture of press tools, moulding boxes and moulds (except ingot moulds), vices and clamps, and blacksmiths’ tools: forges, anvils etc.
manufacturing of weapons and ammunition
The manufacture of heavy weapons (artillery, mobile guns, rocket launchers, torpedo tubes, heavy machine guns), small arms (revolvers, shotguns, light machine guns), air or gas guns and pistols, and war ammunition. Also the manufacture of hunting, sporting or protective firearms and ammunition and of explosive devices such as bombs, mines and torpedoes.
non-ferrous metal processing
Various processing methods on non-ferrous metals and alloys such as copper, zinc and aluminium.
- Scope note
- Excludes precious metals.
types of metal manufacturing processes
Metal processes linked to the different types of metal, such as casting processes, heat treatment processes, repair processes and other metal manufacturing processes.
Cross-sector
2 competencescutting technologies
The variety of cutting technologies, such as software or mechanics, guiding cutting processes through lasering, sawing, milling etc.
digital
mechanics
Theoretical and practical applications of the science studying the action of displacements and forces on physical bodies to the development of machinery and mechanical devices.
Optional skills and competences 12 competences
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
1 competencemonitor stock level
Evaluate how much stock is used and determine what should be ordered.
Cross-sector
11 competencesadvise on machinery malfunctions
Offer advice to service technicians in case of machinery malfunctions and other technical repair tasks.
apply cross-reference tools for product identification
Employ cross-reference tools and programmes, listing file names and line numbers, to identify part numbers, descriptions, and the vendor as source of origin.
consult technical resources
Read and interpret technical resources such as digital or paper drawings and adjustment data in order to properly set up a machine or working tool, or to assemble mechanical equipment.
inspect quality of products
Use various techniques to ensure the product quality is respecting the quality standards and specifications. Oversee defects, packaging and sendbacks of products to different production departments.
keep records of work progress
Maintain records of the progress of the work including time, defects, malfunctions, etc.
mark processed workpiece
Inspect and mark parts of the workpiece to indicate how they will fit into the finished product.
monitor conveyor belt
Monitor the flow of the work pieces on the conveyor belt as they are processed by the machine to ensure optimal productivity.
operate scrap vibratory feeder
Operate a vibratory feeder which gradually feeds scrap or other waste material into a bin.
perform machine maintenance
Perform regular maintenance, possibly including corrections and alterations, on a machine or machine tool to ensure it remains in a proper productive state.
perform product testing
Test processed workpieces or products for basic faults.
record production data for quality control
Keep records of the machine's faults, interventions and irregularities for quality control.