Sprinkler fitters are responsible for the installation of fire protection systems that sprinkle water. They connect pipes, tubing and the necessary accessories. Sprinkler system installers also test the systems for leaks.
The different types of frangible sprinkler bulbs, which are designed to break at a certain temperature to trigger the sprinkler action. The colour codes of the enclosed fluids, signifying the temperatures at which the bulbs break due to the expansion of the enclosed fluid.
A variety of types of piping and piping materials. PVC, CPVC, PEX, copper, and the advantages, usage cases, risks, and costs of each.
Mechanical systems, including gears, engines, hydraulic and pneumatic systems. Their functions and likely defects.
A variety of common plumbing tools and their usage cases, limitations and risks.
The different types of installations using water supply for the control and extinguishing of fires. These systems include fast- and standard response sprinklers wet and dry pipe systems, deluge systems, pre-action systems, foam water sprinkler systems, water spray systems, and water mist systems. Their preferred usage cases, advantages and disadvantages.
Install individual fire sprinklers on a prepared pipe system. Point the sprinklers to a specified direction if required.
Make sure the materials are fit to be used together, and if there are any foreseeable interferences.
Check the water pressure in a water circulation system, using a built-in gauge or by attaching a water pressure gauge onto a pipe. In the case of a stand-alone gauge, be sure to depressurise the system before attaching the gauge.
Interpret and understand plans and drawings in manufacturing processes which include representations in two dimensions.
Install a device that pumps water from a lower location to a higher location. Set the pump in the right position, taking care not to expose any sensitive parts to water. Connect the pump to water pipes and a power source.
Apply the relevant health and safety procedures in construction in order to prevent accidents, pollution and other risks.
Check construction supplies for damage, moisture, loss or other problems before using the material.
Interpret and understand plans and drawings in manufacturing processes which include representations in three dimensions.
Install the system of pipes used to transport a fluid, be it a liquid or a gas, from one point to another and connect it to the fuel and water supply lines, air ducts, and other components.
Use different measurement instruments depending on the property to be measured. Utilise various instruments to measure length, area, volume, speed, energy, force, and others.
Apply ergonomy principles in the organisation of the workplace while manually handling equipment and materials.
No competences in this bucket.
A variety of devices that detect the optical qualities, air composition or ionisation patterns of smoke, fire and carbon monoxide, usually to prevent fire or illicit smoking. The different advantages, disadvantages, usage cases and price points of each type.
The internal logic of the security panel, where security sensors send their data for processing. The different components of the panel, such as the wire contact points, motherboard and transformer.
No competences in this bucket.
Make attachments between PEX pipes and between PEX and other materials. Put a copper crimp ring around both ends. Insert a connector piece between the cable ends and use the appropriate size crimp tool to crimp the rings. Check the crimp operation using a go-no-go tool.
Install a variety of metal or plastic profiles used to attach materials to each other or to structural elements. Cut them to size if called for.
Lay different types and sizes of PVC piping in prepared spaces. Cut the piping to size and attach it by using glue or other systems. Make sure the piping has a clean edge, is free of strains and has the right tilt for fluids to run through.
Evaluate how much stock is used and determine what should be ordered.
Receive incoming construction supplies, handle the transaction and enter the supplies into any internal administration system.
Draw wires from the correct contact points in a variety of security sensors to the control panel. Make sure the wiring plan of the control panel is clear and effective.
Work as part of a team in a construction project. Communicate efficiently, sharing information with team members and reporting to supervisors. Follow instructions and adapt to changes in a flexible manner.
Take measurements on site and estimate the amount of materials required for the construction or restoration project.
Place insulation material, often shaped into rolls, in order to insulate a structure from thermical or acoustic influences and to prevent fire. Attach the material using face staples, inset staples, or rely on friction to keep the material in place.
File and organise personal administration documents comprehensively.
Maintain records of the progress of the work including time, defects, malfunctions, etc.
Use a hand drill to make holes in various types of material such as stone, brick and wood. Take care to use the appropriate equipment, settings, drill bit and pressure for the task.
Order required materials for the construction project, taking care to purchase the most suitable material for a good price.
Test sensors using appropriate equipment. Gather and analyse data. Monitor and evaluate system performance and take action if needed.
Use elements of protective clothing such as steel-tipped shoes, and gear such as protective goggles, in order to minimise risk of accidents in construction and to mitigate any injury if an accident does occur.