cut glass
Use glass cutting tools or diamond blades to cut pieces out of glass plates, including mirrors.
Plate glass installers fit panes of glass into windows and other structural elements like glass doors, walls, façades and other structures.
Competences and skills
49 ESCO relationsEssential skills and competences 21 competences
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
8 competencesinstall construction profiles
Install a variety of metal or plastic profiles used to attach materials to each other or to structural elements. Cut them to size if called for.
install frameless glass
Set frameless glass panes, usually in showers and on bathtubs. Use plastic shims to make sure the glass doesn't touch any hard surfaces, which may cause scratching or breaking. Make sure the glass is level and attach any brackets to keep the glass in place. Waterproof the edges with silicone rubber caulk.
install glass frames
Securely set frames in place to be fitted with glass panes. Set storefront frames, balustrades, and curtain wall framing for a variety of usage cases.
interpret 2D plans
Interpret and understand plans and drawings in manufacturing processes which include representations in two dimensions.
remove glass from windows
Remove glass from windows without causing damage. Inspect the windows and take the necessary steps, like removing putty and prying out glazer's points. Recover the pane in one piece and clean it if called for.
transport construction supplies
Bring construction materials, tools and equipment to the construction site and store them properly taking various aspects into account such as the workers' safety and protection from deterioration.
use shims
Set shims in gaps to keep objects firmly in place. Use the suitable size and type of shim, depending on the purpose.
Cross-sector
13 competencesadjust glass sheets
Adjust glass sheets` thickness, according to the gauge readings, using asbestos pads on the sides of the kilns` cooling jacket.
follow health and safety procedures in construction
Apply the relevant health and safety procedures in construction in order to prevent accidents, pollution and other risks.
green
handle broken glass sheets
Handle the damaged glass sheets so that they do not collapse into the kiln by closing the roll of the drawing kiln.
inspect construction supplies
Check construction supplies for damage, moisture, loss or other problems before using the material.
inspect glass sheet
Inspect the drawn sheets of glass in order to detect any flows such as blisters or stones, signalling the defective glass sheets.
interpret 3D plans
Interpret and understand plans and drawings in manufacturing processes which include representations in three dimensions.
manipulate glass
Manipulate the properties, shape and size of glass.
rinse glass
Rinse the glass following the bevelling process using water in order to remove the abrasive residue.
smooth glass edges
Use automated abrasive belts to smooth or shape glass edges.
smooth glass surface
Smooth glass or lens surfaces of optical instruments with grinding and polishing tools, such as diamond tools.
use measurement instruments
Use different measurement instruments depending on the property to be measured. Utilise various instruments to measure length, area, volume, speed, energy, force, and others.
use safety equipment in construction
Use elements of protective clothing such as steel-tipped shoes, and gear such as protective goggles, in order to minimise risk of accidents in construction and to mitigate any injury if an accident does occur.
work ergonomically
Apply ergonomy principles in the organisation of the workplace while manually handling equipment and materials.
Optional knowledge 2 competences
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
1 competencetypes of glazing
Various types of glass, insulating glazing and mirror glass and their contribution to energy performance. Their usage cases, advantages and disadvantages, and price points.
Cross-sector
1 competenceglass coatings
Coatings used to protect glass from damage, to influence its behaviour when damaged, to keep harmful UV rays out, and others. Their usage cases, advantages and disadvantages and price points.
Optional skills and competences 26 competences
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
9 competencescreate architectural sketches
Create architectural sketches for the design and detail specifications of interiors and exteriors to scale.
install roof windows
Install various types of windows on the roof such as skylight, dormer windows and flat roof windows.
install sill pan
Install different types of sill pans, systems that sit underneath the window sill to collect any excess moisture or fluids and convey it outside as to prevent moisture damage to the window or adjacent structures.
install structural glazing
Assemble the support structures, fix them on the building facade, insert the chassis if necessary, and fit the glass panes into the structures. In case of large construction projects, fix pre-assembled modules on the facade using rigging equipment and power tools.
monitor stock level
Evaluate how much stock is used and determine what should be ordered.
process incoming construction supplies
Receive incoming construction supplies, handle the transaction and enter the supplies into any internal administration system.
set up temporary construction site infrastructure
Set up a variety of temporary infrastructure used on building sites. Put up fences and signs. Set up any construction trailers and make sure that these are connected to electricity lines and water supply. Establish supplies stores and garbage disposal in a sensible manner.
use squaring pole
Use a squaring pole, a telescopic measurement pole that allows for checking the length of the diagonals of an inset area of a structure. If the diagonals are of equal length, the inset is straight.
work in a construction team
Work as part of a team in a construction project. Communicate efficiently, sharing information with team members and reporting to supervisors. Follow instructions and adapt to changes in a flexible manner.
Cross-sector
17 competencesapply a protective layer
Apply a layer of protective solutions such as permethrine to protect the product from damage such as corrosion, fire or parasites, using a spray gun or paintbrush.
apply insulation strips
Apply insulation strips, which prevent air exchange between outdoors and indoors areas.
green
assemble insulating glazing units
Assemble two glass panes with a spacer, usually made of stainless steel, aluminium or structural foam, and apply an adhesive sealant to press the glass panes against the spacer. Drill holes in the spacer to draw out the air, fill the space with gas or leave the vacuum, then seal the holes.
assemble windows
Assemble the profiles to build window or glass door frames using cutting, trimming, sealing and welding equipment,fix the metal fittings with power tools, and insert the glass pane.
build scaffolding
Assemble temporary scaffolding structures for construction, maintenance or event-related purposes. Set vertical standards on the base plate of the scaffolding structure. Ensure the scaffolding structure is secured from lateral forces and supported sufficiently. Place wood or metal scaffolding decks into the transoms to stand on and make sure they are aligned. Safely set scaffolding stairs and ladders, which allow enough room for safe and easy manoeuvring.
calculate needs for construction supplies
Take measurements on site and estimate the amount of materials required for the construction or restoration project.
follow safety procedures when working at heights
Take necessary precautions and follow a set of measures that assess, prevent and tackle risks when working at a high distance from the ground. Prevent endangering people working under these structures and avoid falls from ladders, mobile scaffolding, fixed working bridges, single person lifts etc. since they may cause fatalities or major injuries.
install insulation material
Place insulation material, often shaped into rolls, in order to insulate a structure from thermical or acoustic influences and to prevent fire. Attach the material using face staples, inset staples, or rely on friction to keep the material in place.
keep personal administration
File and organise personal administration documents comprehensively.
keep records of work progress
Maintain records of the progress of the work including time, defects, malfunctions, etc.
maintain equipment
Regularly inspect and perform all required activities to maintain the equipment in functional order prior or after its use.
maintain work area cleanliness
Keep the working area and equipment clean and orderly.
manage waste
Manage or dispose of significant amounts of waste materials and/or hazardous materials, in accordance with legislation, thereby respecting environmental and company responsibilities. Ensure required licenses and permits are in place and reasonable management practices, industry standards, or commonly accepted farming practices followed.
green
- Scope note
- Includes recycling regulations.
order construction supplies
Order required materials for the construction project, taking care to purchase the most suitable material for a good price.
pack fragile items for transportation
Pack fragile items such as glass panes or glass objects using the appropriate boxes and cushioning materials such as air-encapsulated plastic or customised foam enclosures to make sure the content will not move during transportation.
rig loads
Safely attach loads to different types of hooks and attachments, taking into account the weight of the load, the power available to move it, static and dynamic tolerances of all instruments and materials, and the mass distribution of the system. Communicate with the operator verbally or with gestures to ensure the safety and efficiency of the operation. Detach loads.
set window
Place a window in a prepared position such as a wall or floor, in case of full height glass. Use measurement tools to ascertain that the window is straight and plumb.