types of pipelines
The various types of pipelines and their different usages including the differences between pipelines used to transport goods over short and long distances, and their respective feeding systems.
Sewerage maintenance technicians inspect sewers and pipeline systems. They do this by using moving video cameras, whose recordings tell them whether they need to perform any maintenance and repair on these types of systems.
Competences and skills
41 ESCO relationsEssential knowledge 1 competence
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
1 competenceCross-sector
0 competencesNo competences in this bucket.
Essential skills and competences 19 competences
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
6 competencesassemble manufactured pipeline parts
Assemble parts and components made for pipelines in companies or sites. Construct pipeline infrastructures or re-assemble parts that were taken out for repair.
detect flaws in pipeline infrastructure
Detect flaws in pipeline infrastructure during construction or over the passage of time. Detect flaws such as construction defects, corrosion, ground movement, hot-tap made by error, and others.
inspect pipelines
Walk flow lines to identify damage or leaks; use electronic detection equipment and conduct visual inspections.
maintain septic tanks
Maintain effluent sewer systems which use septic tanks to collect sewage, and separate solid waste from it, from residential buildings or organisations. Perform routine maintenance tasks and cleaning duties, identify and repair faults.
supervise sewerage systems construction
Supervise the implementation of correct sewerage system plans and methods during construction, installation, and maintenance of sewerage systems to ensure conformity to the approved plans, and the safety of operations.
use pipeline video equipment
Handle movable video cameras which visually inspect sewerage systems and pipelines. This camera is attached via a long cable entwined upon a winch. Analyse the footage to see if any repair or maintenance is needed.
digital
Cross-sector
13 competencesexamine civil structures
Perform non-destructive testing on civil structures such as bridges and pipelines in order to find abnormalities or damage.
follow health and safety procedures in construction
Apply the relevant health and safety procedures in construction in order to prevent accidents, pollution and other risks.
green
inspect sewers
Inspect sewage drains in order to detect explosive gases using gas analysis equipment.
maintain records of maintenance interventions
Keep written records of all repairs and maintenance interventions undertaken, including information on the parts and materials used, etc.
maintain test equipment
Maintain equipment used for testing the quality of systems and products.
prevent damage to utility infrastructure
Consult utility companies or plans on the location of any utility infrastructure that may interfere with a project or be damaged by it. Take the necessary steps to avoid damage.
prevent pipeline deterioration
Ensure the conservation of pipelines by undertaking adequate maintenance of the system and its coating properties. Prevent corrosion formation, leaks, and other problems.
recognise signs of corrosion
Recognise the symptoms of metal showing oxidation reactions with the environment resulting in rusting, copper pitting, stress cracking, and others, and estimate the rate of corrosion.
record test data
Record data which has been identified specifically during preceding tests in order to verify that outputs of the test produce specific results or to review the reaction of the subject under exceptional or unusual input.
repair pipelines
Conduct maintenance and repair work on pipelines to prevent or remedy damages using, if necessary, remote-controlled robots.
secure working area
Secure the operation site fixing boundaries, restricting access, placing signs and taking other measures in order to guarantee public and staff safety.
test sensors
Test sensors using appropriate equipment. Gather and analyse data. Monitor and evaluate system performance and take action if needed.
digital
use testing equipment
Use equipment to test performance and operation of machinery.
Optional knowledge 2 competences
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
1 competencepipeline coating properties
Pipeline coating properties such as external anti-corrosion, internal coating, concrete weight coating, thermal insulation, and others.
Cross-sector
1 competencenon-destructive testing
The techniques used to assess the characteristics of materials, products and systems without causing damage, such as ultrasonic, radiographic, and remote visual inspection and testing.
Optional skills and competences 19 competences
Occupation specific
0 competencesNo competences in this bucket.
Sector-specific
9 competencesassemble video tape footage
Assemble all raw video footage, with camera shots either recorded or transferred onto video tape in preparation for inputting into the computer.
digital
clear pipelines
Clear pipelines by pumping water or other substances through them, or wash the pipelines manually or using suitable machinery.
ensure regulatory compliance in pipeline infrastructures
Ensure that the regulations for pipeline operations are met. Ensure pipeline infrastructure compliance with legal mandates, and compliance with regulations governing the transportation of goods via the pipelines.
monitor storage vessels used to transport goods via pipeline
Monitor storage vessels for specific goods such as gases, liquids, crude oil, and others. Check gauge levels and other storage requirements depending on the type of goods.
perform follow-up on pipeline route services
Perform follow-up activities related to the plan, the distribution schedule, and the service yielded by the pipeline infrastructure. Ensure that pipeline route assignments are accomplished and meet customer agreements.
set management priorities in pipeline networks
Set the priorities for the performance of activities in pipeline networks. Analyse the different issues within the infrastructure, and tackle issues that may significantly affect operations and those that may be costly if left unaddressed.
test pipeline infrastructure operations
Perform tests on pipelines, such checking whether there is continuous flow of materials through them, examining for leakages, and assessing the suitability of the location of the pipeline is.
use non-destructive testing equipment
Use specific non-destructive testing methods and equipment that do not cause any damage to the product, such as X-rays, ultrasonic testing, magnetic particle inspection, industrial CT scanning and others, in order to find defects in and assure quality of a manufactured and a repaired product.
work in a construction team
Work as part of a team in a construction project. Communicate efficiently, sharing information with team members and reporting to supervisors. Follow instructions and adapt to changes in a flexible manner.
Cross-sector
10 competencescarry out cleaning of road drains
Remove leaves, litter, and other debris to prevent blockages in drains and sewers.
develop material testing procedures
Develop testing protocols in collaboration with engineers and scientists to enable a variety of analyses such as environmental, chemical, physical, thermal, structural, resistance or surface analyses on a wide range of materials such as metals, ceramics or plastics.
dispose of sewage sludge
Operate equipment to pump the sewage sludge and store it into containers in order to transform the gases it emits into energy. After this phase, dry the sludge and evaluate its potential reuse as fertilizer. Dispose of the sludge if it contains hazardous elements.
green
follow up pipeline integrity management priorities
Perform follow up on priority actions in the pipeline infrastructure, such as complete coverage, service consistency, and facilitation.
keep records of work progress
Maintain records of the progress of the work including time, defects, malfunctions, etc.
maintain pipeline coating properties
Perform maintenance to pipelines and their coating properties by applying chemicals and techniques. Maintain external anti-corrosion, internal coating, concrete weight coating, thermal insulation, and other coating properties.
mitigate environmental impact of pipeline projects
Strive to mitigate the potential impact that pipelines and the goods transported in them can have on the environment. Invest time and resources into consideration of the environmental effects of the pipeline, the actions that could be taken to protect the environment, and the potential increase in the costs of the project.
green
operate GPS systems
Use GPS Systems.
digital
report test findings
Report test results with a focus on findings and recommendations, differentiating results by levels of severity. Include relevant information from the test plan and outline the test methodologies, using metrics, tables, and visual methods to clarify where needed.
use personal protection equipment
Make use of protection equipment according to training, instruction and manuals. Inspect the equipment and use it consistently.